Products
- Pump
- Marine Pump
- Jet Pump
- Plunger Pump
- Centrifugal Pump
- Submersible Pump
- Vortex Pump
- Mud Pump
- Vane Pump
- Lubricating Oil Pump
- Gear Pump
- Hydraulic Pump
- Fire Pump
- Mixed Flow Pump
- Sludge Discharge Pump
- Impurity Pump
- Dredging Pump
- Metering Pump
- Vacuum Pump
- Magnetic Pump
- Process Pump
- Pneumatic Pump
- Multi-stage Pump
- Axial Flow Pump
- Other Pump
G Series Gear Pump
- Type:Gear Pump
- CAS No:
- Qty in 20' FCL:
- Min. Order:
- Packaging:
-
Specification
Max. discharge capacity
35.2/42.5 L/min
Max. discharge pressure
1.0 MPa
Max. speed
1410/1700 rpm
Main materials
SUS316, SiC, PTFE
Required power range
0.2 to 3.7 kW
Liquid temp. range
0 to 150 C deg.
Viscous liquid
0.5 to 10000 mPa•s
Slurry liquid
For further information, please contact us.
Sealing method
Gland packing or mechanical seal
-
Internal gear pumps incorporating fine ceramic gears
Both high viscosity and low viscosity liquids can be handled
When a low-viscosity liquid is handled by a conventional gear pump, "jamming" and "seizing" tend to occur. SiC ceramic gears do not have this problem even when the pump functions at a high speed. Silicon nitride ceramic gears show stable performance in handling high viscous liquids, due to their strength and toughness.
Ability to handle fine slurries
Now that gears and other sliding components including bearings are made of ceramic, the handling of fine slurries hard and soft will not impair the longevity of these pumps. Performance has been noticeably improved. Ceramic gears make it possible to reduce spaces between parts, therefore out performing conventional metal gear models.
Quiet liquid transfer with less pulsation
Without the pulsation that is common to reciprocating pump and general use type gear pumps, liquid is transferred quietly and smoothly no agitating or foaming.
High self-priming ability
Because the suction port is at the top of the pump, the pump chamber remains full when pump stops working. Self-priming is enhanced at re-start.
Constant flow injection
Regardless of the temperature change, viscous liquid can be handled at accurate flow rate, which cannot do with other pumps. As the output is linearly related to rpm, the flow rate is easily controlled by changing speed.